Skip to main content

leaning laptop

How to Clean Laptop Heat Reduces the Effectiveness

When the laptop was in use for a long time, we will realize the noise from the fan heat sink of the laptop. That is because the laptop used power too. Laptop to always maintain a certain limit temperature is necessary. Laptop after 1 year of operation will be more dirt accumulation and increasing numbers.

Meanwhile, laptop will become hot, works well and can no longer stop working suddenly. This will cause damage to the machine. The should do is maintenance, cleaning the laptop the right way. You can manually clean up at home or to the center of the laptop. You can prevent this condition if you start using the machine. Always keep clean the outside of the laptop, make sure to use a laptop in the work environment is not dirt.

  • Cleaned In the Most Important Position

Casing and frame structure design laptop of each is different. In some cases, you can observe on the parts inside you need to clean through the plastic sheet. If the observer doesn’t see the electronic IC, you can take some time to dismantle the frame the link in laptop. If the laptop is draining from the bottom. These machines are often easier to dismantle, enough for the necessary components. If your laptop open from the top down, you will have to start by detachable keyboard. The best is you should find and read the instructions carefully. The manual documents comes in the box your laptop.

  • These Tools Support Clean Laptop

Cleaning the laptop mostly. So what you need are the right tools to start the work. You will need a set of screwdrivers, electric to handle small and flat-head screw snail is found in the laptop. A brush has soft bristles and a small dust can all be useful. There are many positions inside the laptop is prone to dust around, so it tends to concentrate in the seat ventilation. Before cleaning the laptop, make sure your laptop is turned off and disconnect the power source and remove the battery. Laptop keyboard is the most popular dust. The keyboard will be attached to the machine by two or three screws, underneath a plastic protective layer. All position screws will vary on each type of machine. When you have removed the screws at the top you can usually drag the keyboard unit towards you. Should not tug it. Because you will damage its connection. Either way, You also have to be careful and meticulous in the process of cleaning a laptop. Use a soft brush to help remove any dust on the hardware of the laptop.

  • Clean the Cooling Fan Laptop Cooler

The next step should remove dust on the fan laptop, add little oil to operate quieter fan. Dirt can attach in the vents. To do is wipe them away. You check out, consider every detail again. When finished cleaning, take your computer back assembly carefully.

  • What to Do to Maintain Your Laptop is Better

+ Never drink wine or eat while working on my laptop

+ Should not spray cleaners directly on the screen, go for sprayed on a soft cloth and then wipe clean.

+ Do not remove the buttons on the keypad, if you do not know how to insert them again.

+ Carefully with a laptop screen as they are connected by the very thin cable. They are very vulnerable.